The A - Z Of What You Can Do With Netbiter: - Expert Engineering & Services
The A - Z Of What You Can Do With Netbiter:

The A - Z Of What You Can Do With Netbiter:

Short Description:

Product Description

We GSM Solutionz are just the facilitators & system integrators to take your pain. We SAY “let your machine, system communicate with you directly” remotely or in front of YOU, Manage your installations on-line. Netbiter enables you to remotely monitor and control your field equipment any time, any place. Monitor energy consumption, fuel levels, battery status etc.Start or stop equipment remotely. Configure machines and PLCs remotely. We offer our services all over Pakistan. So install Netbiter and forget worrying about your equipment's.


Remote monitoring of Power Generators



Make sure your generator is ready to start when needed! No matter which brand of generator or control panel you are using, Netbiter gives you online access to your genset, 24/7. 



MONITOR HEALTH AND willingness

Access common genset parameters (read/write) like:
Oil pressure, engine temperature, battery voltage, power output, diesel levels, engine run time and engine RPM.

REMOTE OPERATION AND CONTROL

Remotely start and stop your generator in the field from any location. Remotely acknowledge generated alarms. Reduce expensive on-site service visits.

ALARM MANAGEMENT

Receive alarm notification when the fuel level reaches a preset level or fuel theft attempts. Direct alarms to service personnel via SMS or email. 

GENERATOR FLEET MANAGEMENT

Manage large-scale genset rental fleets with in-built GPS functionality. Track the current position of the generator in real-time.

REMOTE CONFIGURATION OF GENSET CONTROLLERS

Combine standard remote monitoring capabilities with remote configuration  using the vendor's own utility/configuration software. Or combine the two services for multiple sites and users





CONNECTING THE GENERATOR

A Netbiter communication gateway connects to the power generator using a serial, Ethernet connection. The gateway sends information via the Internet or the cellular network (GSM/GPRS/3G) to the cloud-based Netbiter Argos data center. The data is encrypted both to, and from the Argos server.

ONLINE ACCESS 

By logging on to Netbiter Argos at www.netbiter.net, you can see all parameters of your generator via a computer, tablet or smart phone.


SET UP AND CONFIGURE IN A MATTER OF MINUTES


Just connect the Netbiter gateway to your power generator and then configure it online at your free time. All parameters are pre-configured for your genset vendor which makes it possible to perform even large scale-installations without the need for an IT expert. 






Remote monitoring of fuel tanks

A very large percentage of the fuel for field applications is lost. With a Netbiter connected to your fuel tank, you can make sure that you get the correct amount of fuel at fill-up and that you are notified whenever fuel levels drop too fast (theft or leakage).






What can you do on-line?

ALARM MANAGEMENT

Immediately detect if fuel is being stolen. Direct alarms to service personnel via SMS or email. 

MONITOR LEVELS

Make sure you get the agreed fuel levels at fill-up.

AVOID UNNECESSARY TRANSPORTS

Only fill up with fuel when you really need it.

GENERATOR FLEET MANAGEMENT

Manage large-scale tank fleets with in-built GPS functionality. Create secure zones using geo-fencing to prevent fuel theft.

GET REPORTS AND STATISTICS

Optimize your fuel usage by comparing your historical usage.

NET BITER Tank Sensor

The Netbiter offering includes an Ultrasonic Tank Sensor an easy-to-use solution for monitoring the content level of fuel tanks, water tanks, oil tanks etc.It is made exclusively for Netbiter and is mounted on top of a tank to give a very exact reading (<1% margin of error). It can be used on most tank types up to 2 meter’s height.

NO CALIBRATION NEEDED

You simply connect the tank sensor to your Netbiter gateway, enter the tank type and dimensions, and the content is displayed in litres in your Netbiter Argos web interface.




Remote management of Telecom Base Stations 



Netbiter offers a vendor-independent solution for remote management of passive infrastructure on a BTS site. The solution includes Netbiter gateways, fuel sensors, power meters, temperature sensors and enables remote control of existing controllers on site.
Remote configuration. You can also use Netbiter Remote Access to remotely upgrade the firmware in your rectifier, BMS etc,







       1.      Reduced energy consumption
Energy metering will help you make the right decisions

2.      Reduced service trips 
Perform service only when needed

3.      Increased lifetime of batteries 
Keeping track of temperatures in your BTS will increase lifetime

4.      No malfunctioning gensets
Improve reliability and operation of back-up power generators

5.      Minimized fuel theft
Immediate alarms when fuel levels drop too fast

NETBITER ALLOWS YOU TO REMOTELY HANDLE


1.      Fault management (FM) such as alarms and notifications at critical events.
2.      Configuration management (CM) for example setting the cooling temperature on your FCU or air conditioning.
3.      Performance management (PM) - generate instant or scheduled statistics and reports.






Switch field equipment on or off with a single click


Even modern equipment locks up. Often, the only way to resolve the problem is to go out on site to flip the switches and reboot the system.But what if you could do a reboot remotely?




With Netbiter, you can remotely reboot and power cycle your DC equipment from anywhere, saving you a lot of service trips. The cost of installing a Netbiter is usually the same as a few service visits, so the ROI is often a mere couple of months.


TAILORED FOR FLEXIBILITY

When using Netbiter for remote DC-Power Switching you can choose between 2 or 4 contacts that can switch up to 50A each. They are individually controlled and you will automatically get feedback of the status of the switching. Since all sites are individual, you can expand the number of contact on this solution as well. 






AND BEST OF ALL...


Using Netbiter for DC power switching will give you access to all the functionality in Netbiter Argos such as energy metering, fuel management, FCU management , trend graphs, statistics, reports and alarms via email or SMS.


We would like you to subscribe us for more updates and hot deals .you can subscribe by sending your email address






1 Review:

  1. Nice blog..! I really loved reading through this article... Thanks for sharing such an amazing post with us and keep blogging it system integrator saudi | it system integrator egypt | it system integrator dubai

    ReplyDelete